2.setup minicom by command "minicom -s". for example device "ttyUSB0", speed 38400
3.generate kermit initial script .kermrc on root directory as following
set line /dev/ttyUSB0
set speed 38400
set carrier-watch off
set handshake none
set flow-control none
robust
set file type bin
4. prepare download image for example standby.bin
5. show minicom console as below picture
6. setup kermit on leopard side
7. transfer minicom to kermit on linux by ctrl-a,z,k
8. send image by kermit command
9. file transfer on kermit console
10.quit command back to mincom,then this job has done.
